Authorized Distributor — Metro Detroit

Altec AIR
Industrial Dryers & Filtration

Altec AIR specializes in one thing: the highest quality compressed air treatment equipment available. Desiccant dryers down to -100°F dew point, refrigerated dryers up to 3,000 SCFM, and high-efficiency filtration for every industrial application.

Desiccant Dryers Refrigerated Dryers Filters & Elements Request a Quote
Desiccant Air Dryers · Down to -100°F Dew Point · Up to 3,000 SCFM
Desiccant Air Dryers
Photo Coming Soon
Desiccant · Heatless
PHD Series — Heatless
Up to 3,000 SCFM · -40°F Dew Point
Twin-tower heatless desiccant dryer for demanding industrial applications. No heater required — uses a portion of dried air for regeneration. Simple, proven design with no moving parts in the drying circuit. Available from small point-of-use to large plant-wide systems.
PDP -40°FUp to 3,000 SCFMHeatless RegenNo Moving PartsTwin Tower
Request Quote View Products ↗
Photo Coming Soon
Desiccant · Heated
PHX Series — Heated Purge
Up to 3,000 SCFM · -100°F Dew Point
Heated purge desiccant dryer achieving dew points as low as -100°F — the lowest available. Uses an electric heater to regenerate desiccant without consuming compressed air. Ideal for instrument air, outdoor piping, and critical process applications.
PDP -100°FUp to 3,000 SCFMHeated PurgeZero Purge LossCritical Process
Request Quote View Products ↗
Photo Coming Soon
Desiccant · Blower Purge
PBD Series — Blower Purge
Up to 3,000 SCFM · -40°F to -100°F
Blower purge desiccant dryer combining the low dew points of heated desiccant with reduced operating costs. An external blower provides regeneration air, eliminating compressed air purge losses for maximum system efficiency.
PDP -40°F to -100°FBlower PurgeLow Operating CostHigh CapacityEnergy Efficient
Request Quote View Products ↗
Refrigerated Air Dryers · Non-Cycling, Cycling & High Temp · Up to 3,000 SCFM
Refrigerated Air Dryers
Photo Coming Soon
Refrigerated · Non-Cycling
PRO Series — Non-Cycling
Up to 3,000 SCFM · +38°F Dew Point
Standard non-cycling refrigerated dryer for continuous industrial compressed air drying. Reliable, low-maintenance design for facilities with steady air demand. Available in a wide range of flow capacities to match any system size.
PDP +38°FUp to 3,000 SCFMNon-CyclingLow MaintenanceWide Capacity Range
Request Quote View Products ↗
Photo Coming Soon
Refrigerated · Energy Saving
PRC Series — Programmable Cycling
Up to 3,000 SCFM · +38°F Dew Point
Programmable cycling refrigerated dryer with intelligent controls that reduce energy consumption during periods of low demand. The cycling refrigeration compressor shuts off when thermal mass is fully charged, saving up to 50% on operating costs vs. non-cycling units.
PDP +38°FProgrammableUp to 50% Energy SavingsCyclingDigital Controller
Request Quote View Products ↗
Photo Coming Soon
Refrigerated · High Temp
HT Series — High Temperature
Up to 3,000 SCFM · High Inlet Temp
High temperature refrigerated dryer for compressor installations without an aftercooler, or where hot compressed air cannot be pre-cooled. Accepts elevated inlet temperatures up to 180°F while maintaining stable +38°F pressure dew point output.
PDP +38°F180°F Inlet RatedNo Aftercooler NeededHigh Temp RatedIndustrial Grade
Request Quote View Products ↗
Filtration · Protects Dryers & Downstream Equipment
Filters & Elements
Photo Coming Soon
Pre-Filtration
Pre-Filter Series
Particulate & Bulk Liquid
High-efficiency pre-filters for bulk water and particulate removal ahead of dryers and coalescing filters. Protects downstream equipment and extends filter element life. Available in multiple connection sizes to match any system flow rate.
Bulk Liquid RemovalParticulateAuto DrainLow Pressure DropPre-Dryer
Request Quote View Products ↗
Photo Coming Soon
Coalescing Filtration
Coalescing Filter Series
0.01 Micron Oil Removal
High-efficiency coalescing filters removing oil aerosols and fine particulate from compressed air streams. Reduces oil carryover to 0.01 mg/m³ or better. Essential for protecting sensitive downstream equipment, tools, and processes.
0.01 MicronOil AerosolISO 8573-1Low Pressure DropElement Replacement
Request Quote View Products ↗
Photo Coming Soon
Carbon Filtration
Activated Carbon Filters
Oil Vapor & Odor Removal
Activated carbon filter elements for removal of oil vapor, hydrocarbon gases, and odors from compressed air. Required for breathing air applications, food and beverage contact, spray painting, and any process sensitive to hydrocarbon contamination.
Oil Vapor RemovalOdor EliminationBreathing AirFood GradeReplacement Elements
Request Quote View Products ↗
Photo Coming Soon
Replacement Elements
Filter Elements
OEM & Aftermarket Replacement
Replacement filter elements for Altec AIR and compatible competitive dryer and filter units. High-efficiency construction maintains original equipment performance specs. Available for coalescing, particulate, and activated carbon grades.
OEM SpecCoalescingParticulateCarbonCompetitive Cross
Request Quote View Products ↗
Request a Quote

Get Pricing on
Altec AIR Equipment

Josh responds personally — typically within a few hours. No obligation, no pressure.